Light bulb replacement in the fresh food compartment
There are upper and lower light bulbs in the fresh
food compartments.
To replace a bulb:
1. Turn off power at the circuit breaker or fuse box.
2. Remove the light shield from the top fresh food
light by pushing the front end up and pulling it toward
you to release it from the rear retaining lip. (It may
bend slightly.)
To change the bottom refrigerator light, pull out the
top drawer, look to the rear of the fresh food
compartment and replace bulb as needed.
3. Replace with the same size bulb, reinstall the
shield for the upper fresh food light, and turn the
power on.
To reinstall the upper fresh food shield, hook the front
edge first, then push it up and back until the shield
rests in place.
I
Light bulb replacement in the freezer compartment
To replace a bulb:
1. Turn off power at the circuit breaker or fuse box.
2. Remove the freezer light shield by pulling the front
edge down and free and then pull it toward you.
3. Replace with the same size bulb, reinstall the
shield, and turn the power on.
To replace the freezer shield, set the back edge on
s ’
the rear tabs and then push up in the front until it rests
in place.
You may bend the shield slightly to help in removal
and replacement.
(continued next
15
