24
469 MOTOR MANAGEMENT RELAY – QUICK REFERENCE GUIDE
QUICK REFERENCE GUIDE
9.5
Creating a new setpoint file
The EnerVista 469 Setup software allows the user to create new setpoint files independent
of a connected device. These can be uploaded to a relay at a later date. The following
procedure illustrates how to create new setpoint files.
1.
In the File pane, right click on ‘File’ and select the
New Settings File
item. The
EnerVista 469 Setup software displays the following box will appear, allowing for the
configuration of the setpoint file for the correct firmware version. It is important to
define the correct firmware version to ensure that setpoints not available in a
particular version are not downloaded into the relay.
2.
Select the Firmware
Version
for the new setpoint file.
3.
For future reference, enter some useful information in the
Description
box to facilitate
the identification of the device and the purpose of the file.
4.
To select a file name and path for the new file, click the button beside the
Enter File
Name
box.
5.
Select the file name and path to store the file, or select any displayed file name to
update an existing file. All 469 setpoint files should have the extension ‘469’ (for
example, ‘motor1.469’).
6.
Click
Save
and
OK
to complete the process. Once this step is completed, the new file,
with a complete path, will be added to the EnerVista 469 Setup software environment.
9.6
Upgrading setpoint files to a new revision
It is often necessary to upgrade the revision code for a previously saved setpoint file after
the 469 firmware has been upgraded (for example, this is required for firmware upgrades).
This is illustrated in the following procedure.
1.
Establish communications with the 469 relay.
2.
Select the
Actual > Product Information
menu item and record the Software Revision
identifier of the relay firmware as shown below.
