16
GENERAL
D400 SUBSTATION GATEWAY USER’S MANUAL
PRODUCT OVERVIEW
CHAPTER 1: BEFORE YOU START
O
Indicates that this toxic or hazardous substance contained in all of the
homogeneous materials for this item is below the limit required in PRC SJ/
T11363-2006 and EU Directive 2002/95/EC (RoHS)
X:
Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this item is above the limit requirement in PRC
SJ/T11363-2006 and EU Directive 2002/95/EC (RoHS)
The maximum concentration limits (MCV's) apply.
Lead (Pb)
0.1% by weight
=
1000 mg/kg
=
1000 ppm
Mercury (Hg)
0.1% by weight
=
1000 mg/kg
=
1000 ppm
Cadmium (Cd)
0.01% by weight
=
100 mg/kg
=
100 ppm
Chromium VI (Cr6)
0.1% by weight
=
1000 mg/kg
=
1000 ppm
PBB, PBDE
0.1% by weight
=
1000 mg/kg
=
1000 ppm
Product overview
The D400 Substation Gateway is a secure, substation hardened and CE Marked
communications gateway that collects metering, status, event and fault report data from
intelligent electronic devices (IEDs). It summarizes the data from devices and makes it
available to a master station or host computer over standard SCADA protocols. TCP/IP
network connections are supported over the built-in 10/100 MB Ethernet interface and
dial-up (external modem required).
The D400 comes with a built-in human machine interface (HMI)/annunciator as part of the
base software. A Local HMI can be accessed through the Keyboard, Video, Mouse
interface. A full featured substation HMI is accessed using a standard Web browser (HTTP/
HTTPS) network connection. The D400 is configured "online" through a standard Web
browser.
Hardware overview
The D400 is built on a flexible, high-performance, expandable platform powered by a
650 MHz or 1.0 GHz processor. It is distinguished by the noticeable lack of a hard drive and
fan, employing instead the rugged and reliable CompactFlash mass storage and
engineered heat sink and ventilation.
The D400 supports various communication media types through a choice of input/output
(I/0) adapter cards:
•
Serial (up to 8 configurable 2-port adapter cards): RS-232, RS-485, Fiber Optic (Glass or
Plastic)
•
Ethernet: 10/100BaseT, 100BaseFX, or 10BaseFL/100BaseSX