GEK-106426B
MIB High Impedance Bus Differntial Relay
8-3
8 RELAY COMMISSIONING
8.3 RELAY SETTING
8
8.3RELAY SETTING
When the relay is shipped from our factory, it has default settings, which are the starting point for the following tests.
An exhaustive list of all the settings necessary for each test will not be given here. Just the specific settings required for
each test are indicated, and it can be supposed that the other settings do not affect the test being performed.
We must take into account that these tests are only valid for the default factory configuration. Different configurations
involving modifications in certain elements, such as different contact configuration, will require a subsequent modification of
the test procedure.
Acceptance tests are explained assuming the default settings.
