CHAPTER 4: SYSTEM ADMINISTRATION
SYSTEM ADMINISTRATION
MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
4–79
Remote IP
:
The remote IP address that the client attempts to connect to
when the direction is set to “Out” or “Both”. This parameter may
be set to any IP address.
Default value = 0.0.0.0
Remote TC
P
:
The remote TCP port to which the client attempts to connect.
This parameter may be set to any value between 0 and 65535.
Default value = 0
Max Conn
:
The maximum number of incoming TCP connections to accept
for this serial port. This parameter may be set to a value
ranging from 1 to 10.
Default value = 5
Retry Time:
The number of seconds the client waits for a connection to
succeed before timing out and retrying.
Default value = 30
Table 4–47: Terminal Server: Channel Settings
Field Name
Field Value
