4–94
MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
SYSTEM ADMINISTRATION
CHAPTER 4: SYSTEM ADMINISTRATION
The table below describes the parameters you can view and edit in the QoS: Ethernet Port
screen.
4.7.0.4 IP Flows
This screen enables you to define IP packet flows and assign DiffServ markings to each
flow. When a packet is sent by Multinet4, its header fields are checked against the defined
flows. If a match is found, the specified DiffServ marking is applied. This marking overrides
any markings created by specific applications such as the terminal server.
FIGURE 4–58: QoS: IP Flows
Table 4–58: QoS: Ethernet Port
Field Name
Field Value
Port ID:
Ethernet port ID.
Priority Assignment
Rule:
A rule for assigning the priority of packets that are received by
the specified port:
•
Default
– always use the default priority for the port
(Default)
•
DiffServ
– Use the DSCP if it is present. If not, use the
Default Priority
•
802.1p
– Use the 802.1p tag if it is present. If not, use the
Default Priority
Default Priority:
The default priority for a port. See above for when the default
priority is used.
Default value = 3
