INSTRUCTION MANUAL
MULTINET SERIAL TO ETHERNET CONVERTER – INSTRUCTION MANUAL
19
11.
Specifications
ETHERNET
Version 2.0/IEEE 802.3
10BaseT: ....................................................................................................RJ45 connection*
10BaseF: .....................................................................................................820 nm, multi-mode, fiber optic with
ST connector
Modbus
®
TCP/IP
NOTE
Note
* Use a shielded RJ45 cable.
RS485 PORT
RS485 2-wire, half duplex, isolated
Baud Rate: ................................................................................................300 bps to 115.2 Kbps
Protocol: .....................................................................................................Modbus
®
RTU
INSTALLATION
Configuration through EnerVista Setup software
POWER INPUT
AC power: ..................................................................................................100 to 240 V AC (±10%) at 50/60 Hz,
20 VA max
Minimum/Maximum AC voltage: 90
VAC / 264 VAC
DC power: .................................................................................................90 to 300 V DC, 5 W max.
MECHANICAL SPECIFICATIONS
Material: .....................................................................................................Metal enclosure
Dimensions: .............................................................................................6.6”
3.98”
1.46”
Shipping box: ...........................................................................................12.9”
9”
3.25”
Ship weight: .............................................................................................2 lbs.
TYPE TESTS
TEST
REFERENCE STANDARD
TEST LEVEL
Dielectric voltage withstand
EN60255-27
2300VAC
Impulse voltage withstand
EN60255-27
5KV
Insulation resistance
EN60255-27
500VDC >100Mohm
Electrostatic Discharge
IEC61000-4-2
Level 4
RF immunity
IEC61000-4-3
20V/m 80-1GHz
Fast Transient Disturbance
IEC61000-4-4
Class A and B
Surge Immunity
IEC61000-4-5
2KV & 1KV
Conducted RF Immunity
IEC61000-4-6
10Vrms
Radiated & Conducted Emissions CISPR11 /CISPR22/ IEC60255-25 Class A
Power magnetic Immunity
IEC61000-4-8
Level 5
Pulsed Magnetic Immunity
IEC61000-4-9
1000A/m
Damped Oscillatory magnetic
IEC61000-4-10
100A/m
Voltage Dip & interruption
IEC61000-4-11
0,40,70,80% dips, 250/
300 cycle interrupts
Damped Oscillatory
IEC61000-4-18/IEEEC37.90.1
2.5KV / 1MHz
