CHAPTER 4: INTERFACES
CONFIGURE ACCESS CONTROL SETTINGS
MULTISYNC 100 GPS CLOCK – INSTRUCTION MANUAL
45
3.
On the
Ethernet Ports
tab, click the radio buttons to set user group access levels for
different ethernet settings.
4.
Click the Update icon
at the top of the GE Config window to save the
changed configuration to the clock.
Maintenance
Maintenance
tab
GPS
tab: Reset GPS button
Note: If Maintenance access is set to None, the
Maintenance
tab is removed
regardless of the GPS or Information settings.
Security
User
tab
Access Control
tab
Network
tab: SNMP sub-tab.
GPS
GPS
tab
Maintenance
tab: Rest GPS button
Note: If GPS access is set to None, the
GPS
tab is removed along with the Reset GPS
button on the
Maintenance
tab.
Network
Network
tab: Basic sub-tab
NTP
Network
tab: NTP sub-tab
PTP
Network
tab: PTP sub-tab
Clock Setting
Controls Access to...