GE NETWORX NX-116E, User Manual

15 

SERVICE MENU 

 
The service light will be “on” if the security system requires service.  If the service 
light  is “on”, press the [

r

] key followed by the [2] key to determine the service 

condition.  One or more zone lights will illuminate indicating what service(s) is 
required.  Call your service provider immediately for these problems.  Below is a 
listing of what each light means in a service condition. 
 

LIGHT 

PROBLEM 

SYSTEM FAULT - Press the [1] key. The zone light(s) that is 

illuminated corresponds to the system fault(s) below:   

1 

Over Current Fault 

2 Siren 

Trouble 

3 Box 

Tamper 

4 Expander 

Power 

5 

Expander Low Battery 

6 

Expander Box Tamper 

7 Expander 

Trouble 

8 Reserved 

1 

Press the [#] key to return to the 1 of 8 service lights. 

2 

ZONE TAMPER - Press the [2] key and the zone light(s) will 

illuminate showing the zone(s) that are tampered. Press the [#] key 
to return to the 1 of 8 service lights. 

3 

ZONE LOW BATTERY - Press the [3] key. The zone light(s) will 

illuminate showing which zone(s) has a low battery.  This only 
applies to wireless zones. Press the [#] key to return to the 1 of 8 
service lights. 

4 

ZONE LOSS OF SUPERVISION - Press the [4] key and the zone 

light(s) will illuminate showing which zone(s) has loss of 
supervision. This only applies to wireless zones. Press [#] key to 
return to the 1 of 8 service lights. 

5 

ZONE TROUBLE - Press the [5] key and the zone light(s) will 

illuminate showing which zone(s) has a trouble condition. Press the 
[#] key to return to the 1 of 8 service lights. 

6 

RESERVED.  

7 

FAILURE TO COMMUNICATE - This light will illuminate when there 

is a failure to communicate between your system and the central 
station.  

8 

LOSS OF SYSTEM TIME  - This light will illuminate when there has 

been a loss of power and your system clock needs to be reset. 
Instructions are on page 13. 

EXIT 

Press the [#] key to exit the Service Light mode.