Chapter 4
.
PROFINET Network Adapter
74
PACSystems* RSTi PROFIBUS and PROFINET Network Adapter
–August 2013
GFK-2746B
4.1.6.2
PROFINET Parameterization by Rotary Switch
Table 40: Rotary switch: Values and Description
Value
Description
Factory Setting
0
Name of the station will be
read from flash memory.
(For example,STXPNS001-1)
IP address will be read from
flash memory.
Name of station : STXPNS001
IP address:192.168.0.254
Subnet mask: 255.255.255.0
Gateway: 192.168.0.1
1~99
Name of the station will be
STXPNS001-xx.
(xx is the value of Rotary
Switch)
IP address will be read from
flash memory.
■
When the rotary switch is not set to non-zero (1~99):
If the decimal value of the rotary switch is not zero (0), the name of device will be fixed as
“STXPNS001-xx” (xx: 1~99). You must put the fixed device name.
■
When the rotary switch is not set to zero (0):
If the decimal value of the rotary switch is set to zero (0), the device name will be read from
non-volatile memory. You should put the same name as the name from non-volatile memory.
If you want to read the name in non-volatile memory, please refer to Editing Ethernet nodes.
Summary of Contents for PACSystems RSTi
Page 4: ......
Page 8: ......
Page 88: ...88 PACSystems RSTi PROFIBUS and PROFINET Network Adapter August 2013 GFK 2746B...
