Chapter 3. Configuration
72
PACSystems* RX3i & RSTi-EP PROFINET IO-Controller User Manual
GFK-2571N
3.7.4
Installing Power Supplies Between Modules
Additional power supplies may be installed between modules, if necessary. Power Supply modules added in
this fashion will service the power requirements of modules located further right in the same rack.
To add a power supply between modules, expand the
Power Supply Module
node in the
Change Module List
.
Select the desired power supply from the list. When you drag the power supply to the left pane, additional
rows labeled
power
appear between the previously listed modules. Drop the power supply into its intended
location.
Figure 67: Adding Power Supplies between Modules in PNS Rack
Click OK to add the module(s) to the
Configuration
.
Figure 68: VersaMax PNS Rack showing Power Supply Located between I/O Modules
