•
The embedded Ethernet interface is supported by a dedicated microprocessor core. This
dedicated processing capability permits the CPU to support these two LANs with:
o
up to 48 simultaneous SRTP Server connections;
o
up to 16 simultaneous Modbus/TCP Server connections;
o
32 Clients are permitted; each may be SRTP or Modbus/TCP.
o
OPC UA Server with support for up to 5 concurrent sessions with up to 10
concurrent variable subscriptions and up to 12,500 variables;
o
up to 255 simultaneous Class 1 Ethernet Global Data (EGD) exchanges;
o
two independent Redundant IP addresses, one for each of the embedded
Ethernet LANs.
•
Achilles Level 2 Communications Certification
1
.
•
Optional Energy Pack, IC695ACC402, allows CPE330 to instantly save user memory to
non-volatile storage in the event of loss of power.
•
Ability to transfer user programs and/or data to and from USB 2.0 A type Removable
Data Storage Devices (RDSDs).
•
HART Pass Through allows the CPE330 to communicate HART asset management data
between HART-capable I/O modules and PC-based asset management tools. (Requires
additional HART-compatible products.)
•
User may program in Ladder Diagram, Structured Text, Function Block Diagram, or C.
•
Contains 64Mbytes of configurable data and program memory.
•
Supports auto-located Symbolic Variables that can use any amount of user memory.
•
Reference table sizes include 32k bits for discrete %I and %Q and up to 32k words
each for analog %AI and %AQ. Bulk memory (%W) also supported for data
exchanges.
•
Supports up to 512 program blocks. Maximum size for a block is 128KB.
•
For supported I/O, Communications, Motion, and Intelligent modules, refer to the
PACSystems RX3i System Manual
, GFK-2314.
1
Achilles Level 2 Communications Certification available in CPE330 R8.80
3
PACSystems* RX3i 1GHz 64MB CPU w/Ethernet Quick Start Guide
GFK-2941E
