GFK-2571N
May 2018
49
Chapter 3
Configuration
This chapter explains how to configure an RX3i PROFINET Controller and its IO devices in a PACSystems RX3i
controller system. Additional information about RX3i configuration is available in other PACSystems
documentation and in the Logic Developer online help.
This chapter discusses the following topics:
•
Configuration Overview
o
Basic Configuration Steps
•
Configuration Tools
•
Configuring an RX3i PROFINET Controller
o
The PROFINET Controller
’s LAN
o
Configuring PROFINET Controller Parameters
•
Configuring PROFINET LANs
o
Configuring the LAN Properties
•
Adding a VersaMax PROFINET Scanner to a LAN
o
Configuring VersaMax PNS Parameters
o
Adding VersaMax PNS Power Supplies
o
Adding VersaMax Modules to a Remote Node
o
Adding Power Supplies Between Modules
o
Configuring VersaMax Module Parameters
o
Configuring Analog Modules that have Jumpers
•
Adding a Third-Party IO-Device to a LAN
o
Editing Third-Party IO-Device Parameters
o
Configuring Sub-modules of an IO-Device
•
Viewing / Editing IO-Device Properties
•
Assigning IO-
Device Name
s
•
Configuring IO-Devices
•
After the Configuration is Stored to the RX3i CPU
o
Clearing the RX3i Controller Configuration
