8
Consumer Support
Tr
oubleshooting T
ips
Care and Cleaning
Operating Instructions
Safety Instructions
How to Set
Push the knob in and turn in either
direction to the setting you want.
At both
OFF
and
HI
the control
clicks
into position. You may hear
slight
clicking
sounds during cooking,
indicating the control is keeping the
power level you set.
A
HOT SURFACE
indicator light, on the
cooktop, will glow when any radiant
element is turned on. It will remain
on until the surface is cooled to
approximately 150°F.
Hot surface indicator light will:
■
come on when the unit is hot to the touch.
■
stay on even after the unit is turned off.
■
glow until the unit is cooled to approximately
150°F.
Be sure you turn the control knob to
OFF when you finish cooking.
Using the Bridge Burner
(on some models)
To use the bridge burner, turn the
left front control knob to the
BRIDGE
BURNER
settings.
For full bridge surface unit operation,
also turn on the left rear surface unit.
To use only the front surface unit, turn
the control knob to the
FRONT BURNER
settings.
Using the surface units.
Tri-Ring Surface Element
(on some models)
The front right surface element offers 3 cooking
areas to match the size of the cookware you
are using.
To use the largest cooking area, push in
and turn the
SELECTOR
knob to
12
″
. Push
and turn the control knob to the desired
setting.
To use the medium cooking area, press
and turn the
SELECTOR
knob to
9
″
. Push
down and turn the control knob to the
desired setting.
To use the smallest cooking area, turn
the
SELECTOR
knob to
6
″
. Push and turn
the control knob to the desired setting.
This will activate only the smallest inside
heating area.
BURNER
SIZE
9"
6"
12"
