20
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
Auto Recipe
™
Conversion
(on some models)
When using convection bake, the Auto Recipe
™
Conversion feature will automatically convert
entered regular baking temperatures to
convection baking temperatures.
Once the feature is activated, the display
will show the actual converted (reduced)
temperature. For example, if you enter a regular
recipe temperature of 350°F (177°C) and press
the
Start
pad, the display will show
CON
and
the converted temperature of 325°F (163°C).
NOTE:
This feature does not convert convection
bake cooking times, only regular baking
temperatures.
To activate the feature:
Press the
Bake
and
Broil Hi/Lo
pads at the same time for 3 seconds,
until the display shows
SF
.
Press the
Convection Bake
pad. The
display will show
CON OFF
. Press the
Convection Bake
pad again. The
display will show
CON ON
.
Press the
Start
pad.
To deactivate the feature, repeat steps
1–3 above but press the
Start
pad when
CON OFF
is in the display.
+
Special features of your oven control.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds
until the
Off
pad is pressed. This continuous
6-second beep may be canceled.
To cancel the 6-second beep:
Press the
Bake
and
Broil Hi/Lo
pads at the same time for 3 seconds,
until the display shows
SF.
Press the
Timer On/Off
pad. The
display shows
CON BEEP
(continuous
beep). Press the
Timer On/Off
pad
again. The display shows
BEEP.
(This cancels the one beep every
6 seconds.)
Press the
Start
pad.
OR
Tone Volume
This feature allows you to adjust the tone
volumes to a more acceptable volume. There are
three possible volume levels.
Press the
Bake
and
Broil Hi/Lo
pads
at the same time for 3 seconds, until
the display shows
SF
.
Press the
Light On/Off
pad. The
display will show
2 BEEP
. This is
the middle volume level.
Press the
Light On/Off
pad again.
The display will show
3 BEEP
.
This is the loudest volume level.
Press the
Light On/Off
pad again.
The display will show
1 BEEP
.
This is the quietest volume level.
For each time the level is changed,
a tone will sound to provide an
indication of the volume level.
Choose the desired sound level
(
1 BEEP
,
2 BEEP
,
3 BEEP
).
Press the
Start
pad to activate the
desired level shown.
+
Summary of Contents for PCK916
Page 30: ...30 ...