– 13 –
Freezer Door Handle
Removing the Refrigerator Door
REMOVE THE REFRIGERATOR DOORS
Open the refrigerator doors.
Remove the two caps with a flat-head
screwdriver.
Remove the three screws on top with a Phillips-
head screwdriver.
Disengage the two electrical connectors.
To disconnect the water coupling, push in on the
gray color of the coupling and pull out the tubing.
Remove the two grounding cables with a Phillips-
head screwdriver.
Remove three 10 mm hex-head bolts (right
and left).
CAUTION:
When the bolts are
removed, the door may fall and cause personal
injury and/or damage to the door itself.
E
F
G
A
B
C
D
6
(
Continued next page
)
REMOVE THE FREEZER DOOR
HANDLE
Stainless steel and plastic handles:
Loosen the set screws located on the underside
of the handle with the 1/8
″
Allen wrench and
remove the handle.
NOTE:
If the handle mounting fasteners need to
be tightened or removed, use a Phillips-head
screwdriver.
A
5
A
ATTACH THE FREEZER DOOR
HANDLE
Stainless steel and plastic handles:
Attach the handle firmly to the mounting
fasteners and tighten the set screws on the
bottom of the handle with a 1/8
″
Allen wrench.
A
7
A
