– 15 –
Removing the Freezer Door
(
Continued next page
)
REMOVE THE FREEZER DOOR
(cont.)
Use the tip of a screwdriver to separate the rail
from the rail cover. Tilt the front end up and lift
the entire door.
Set the door front on a nonscratching surface.
Push the rail assemblies back into the cabinet.
CAUTION:
Push both sides of the rail
assemblies back at the same time.
E
F
G
REPLACING THE FREEZER DOOR
Two people may be required to complete
this procedure.
ATTACH AND SECURE THE DRAWER
FRONT TO THE SLIDES
Pull out the rail assemblies to the full length on
each side of the cabinet.
CAUTION:
Make sure to pull out the
side rails evenly.
A
1
REMOVE THE FREEZER DOOR
Pull the freezer door open to full extension.
Remove the freezer bin by pulling both brackets
upward at the same time. (See page 8.)
Take out the lower basket by lifting the basket up
from the rail system. (See page 10.)
Remove the two 10 mm hex-head bolts from the
right and left side.
A
B
C
D
