– 17 –
LEVEL THE REFRIGERATOR DOORS
Remember a level refrigerator is necessary
for getting the doors perfectly even. If you
need help, review the previous section on
leveling the refrigerator.
If you open the freezer door, you can see
the center hinge.
Insert the supplied 4 mm Allen wrench
into the shaft of the center hinge.
9
A
B
When
the left
door is
lower
than the
right
door.
When
the left
door is
higher
than the
right
door.
Adjustment
point
Adjustment
point
LEVEL THE REFRIGERATOR
DOORS
(cont.)
Adjust the height by turning clockwise
or counterclockwise. When you turn
counterclockwise, the door will move up.
After adjusting the doors, please insert the
supplied fastener ring using a pair of pliers
in the gap between the hinge grommet and
the center hinge. The number of fastener
rings you will need to insert depends on
the gap.
NOTE:
Four fastener rings are enclosed
with the refrigerator. Thickness of each
fastener ring is 0.04
″
.
9
D
C
LEVEL THE FREEZER DOOR
Locate the height adjuster in the freezer
door. Slightly loosen the four Phillips-
head screws from the door on each side
(right and left).
Loosen the controller screw with a
Phillips-head screwdriver to adjust the
level.
10
A
B
(
Continued next page
)
