– 19 –
Control Features
About the controls with temperature settings.
The temperature controls are preset in the factory at
38°F
for the refrigerator compartment
and
-2°F
for the freezer compartment. Allow 24 hours for the temperature to stabilize to the
preset recommended settings.
The temperature controls can display both the
SET
temperature as well as the actual
temperature in the refrigerator and freezer. The actual temperature may vary slightly from
the
SET
temperature based on usage and operating environment.
To change the temperature,
press and release the
ADJUST FREEZER
or
ADJUST REFRIGERATOR
pad.
The display will show the actual temperature. To
change the temperature, tap either the
ADJUST
FREEZER
or
ADJUST REFRIGERATOR
pad until the
desired temperature is displayed.
Once the desired temperature has been set,
the temperature display will return to the actual
refrigerator and freezer temperatures after 10
seconds. Several adjustments may be required.
Each time you adjust controls, allow 24 hours for the
refrigerator to reach the temperature you have set.
Changing the Temperature
NOTE:
The refrigerator is shipped with protective film covering the temperature controls.
If this film was not removed during installation, remove it now.
(Hold 3 sec
to Lock Control)
I
CE
O
FF/
L
OCK
(Hold 3 sec
for Turbo Cool)
A
DJUST
R
EFRIGERATOR
Light ON/OFF
(Hold 3 seconds)
A
LARM/
L
IGHT
(Hold 3 sec
to Reset Filter)
I
CE &
W
ATER
(Hold 3 sec
for Turbo Freeze)
A
DJUST
F
REEZER
E
NERGY
S
AVER
T
URBO
F
REEZE
T
URBO
C
OOL
R
ESET
F
ILTER
C
UBED
C
RUSHED
W
ATER
ICE
OFF
˚F
38˚ F Recommended
˚F
-2˚ F Recommended
C
LIMATE
K
EEPER
