– 34 –
Interior Lights
Freezer Light
To replace the freezer light:
Unplug the refrigerator.
1.
Remove the freezer upper drawer.
2.
(See
Control
Features.
)
Press in on the back of the light cover then lower
3.
it down and out.
Replace the bulb with an appliance bulb of the
4.
same or lower wattage, and reinstall the light
cover.
Note:
When reinstalling the light cover, make sure
all top tabs snap securely in place.
Reinstall the upper drawer and plug the
5.
refrigerator back in.
Refrigerator LED Light
To replace the refrigerator LED light:
Unplug the refrigerator.
1.
Press in on the back of the LED light cover then
2.
lower it down.
Door Gaskets
The fresh food and freezer doors have magnetic
gaskets that create a positive seal to the front of
the steel cabinet. The magnetic door gaskets are
secured to the doors by a barbed edge that locks
into a retainer channel.
To remove and replace the door gasket:
1. Starting at any corner, pull the old gasket out of
the retaining channel.
2. Soak the new gasket in warm water to make it
pliable.
3. Push the barbed edge of the gasket into the
retainer channel.
Each door magnet is located in a recess at the top
of each door. Using a small
fl
at blade screwdriver,
each magnet can be removed by carefully prying
each side out from the recess.
Pry
Pry
(
Continued next page
)
