– 37 –
Fresh Food Evaporator
WARNING:
Sharp edges may be exposed when
servicing. Use caution to avoid injury. Wear Kevlar
gloves or equivalent protection.
The following components must be removed in
the appropriate order to access the fresh food
evaporator:
Remove the fresh food evaporator cover. (See
1.
Fresh Food Evaporator Cover
.)
Push in the sides of the housing cover and pull
2.
out the cover.
3. Disconnect the 3 fresh food evaporator defrost
component harnesses.
1
2
3
Defrost Components
No.
Component
Wire Colors
1
Bimetal Thermostat
Red and Black
2
Defrost Heater
Tan
3
Thermistor
Yellow
Housing Cover
(
Continued next page
)
4. Peel off the re
fl
ective tape from the drain tray.
5. Remove the 2 Phillips-head screws that hold the
evaporator to the back wall of the refrigerator.
6. Carefully pull the evaporator up to remove the
heat conducting tab from the drain inlet in the
recess.
Refl ective Tape
Heat Tab
Freezer Evaporator Cover
The freezer evaporator cover is held to the back
wall of the refrigerator with 2 recessed Phillips-head
screws.
To remove the
freezer evaporator cover
:
Remove the freezer basket and drawer. (See
1.
Freezer Basket and Drawer
.)
Remove the four 10-mm hex-head bolts (2 on
2.
each side) that attach the drawer front to the
rail assembly.
