– 53 –
Dispenser Display Assembly
The dispenser display assembly incorporates the
interface used for temperature control and features
and houses the dispenser LED lights. The display has
6 tabs that hold it to the dispenser recess.
To remove the dispenser display:
Remove the Phillips-head screw from the
1.
housing.
2. Insert a small
fl
at-blade screwdriver into the
small opening located at the bottom front
corner of the display.
3. Pry the bottom right side of the dispenser
display away from the dispenser recess.
4. Grasp display, pull it towards the right and
remove it from the recess.
5. Disconnect the wire harness.
Caution:
To prevent breaking tabs when installing
the display,
fi
rst insert the left side tabs into the
recess then snap the display in place.
Disconnect
