– 54 –
(
Continued next page
)
Dispenser Assembly
The dispenser assembly includes the duct door, duct
door motor, cam and cam switches, and funnel.
The assembly is held to the dispenser recess with 2
screws and 1 tab.
To replace the dispenser display:
Remove the dispenser display assembly. (See
1.
Dispenser Display Assembly
.)
Disconnect the motor and cam switches wire
2.
harnesses.
Remove the 2 Phillips-head screws. Lower the
3.
assembly down to disengage the tab and pull
the dispenser assembly from the recess.
Disconnect
Disconnect
Tab
Caution:
Wiring is
fi
rmly attached to the cradle
switch. To prevent breaking mounting pins, care
must be taken when removing wiring.
Carefully remove the cradle switch from the
4.
dispenser assembly.
Cradle Switch
Note:
When installing the dispenser assembly into
the recess, ensure the water outlet is placed inside
the funnel and tab is inserted into recess.
Funnel
Water Outlet
