– 56 –
Pantry Drawer Control
To remove the pantry drawer control:
Remove the pantry drawer assembly. (See
1.
Pantry Drawer Assembly.
)
2. Remove the 3 Phillips-head screws that attach
each rail.
3. Pull the rail towards the front of the refrigerator.
4. Disconnect the wire harness from the right side
rail.
5. Remove the Phillips-head screw that attaches
the control to the rail.
Disconnect
Damper Assembly
The damper assembly is held to the back wall of the
refrigerator with a Phillips-head screw and 2 tabs.
To remove the damper motor:
Remove the pantry drawer. (See
1.
Pantry Drawer
Assembly
; follow steps 1 and 2.)
Remove the recessed Phillips-head screw from
2.
the damper cover.
3. Pull the bottom of the damper cover out and
down from the back wall of the refrigerator.
4. Disconnect the 2 wire harnesses.
Disconnect
