– 62 –
Door Closed -
Pin in Track
Door Opening -
Pin Exiting Track
Articulating Door Mullion
The articulating door mullion is attached to the
left side door, and provides a movable center
mullion that maximizes access to the fresh food
compartment. With both refrigerator doors closed
or only the right side door opened, the mullion stays
in position. When the left side door is opened, the
spring-loaded mullion is activated to fold against
the handle side of the door liner.
The pin on top of the mullion and the track, located
at the top center front of the refrigerator, ensures
proper mullion bar alignment upon closure of the
left side door.
(
Continued next page
)
The articulating door mullion consists of the mullion,
heater, external spring, and 3 hinges.
Note:
If the Energy Saver indicator light is lit, then
the articulating door mullion heater is disabled.
The heater operates on 120 VAC with the doors
open or closed. The resistance of the heater is
approximately 1.3K
Ω
. Check for the correct voltage
and resistance on the main board at CN71 pin 5 to
CN1 pin 3.
To remove the articulating door mullion assembly:
Using a small
fl
at blade screwdriver, pry off the 2
1.
screw caps.
2. Remove the 2 Phillips-head screws from the wire
harness cover.
Screw Cap
Screw Cap
