– 64 –
(
Continued next page
)
5. Using a putty knife or similar tool, carefully pry
and lift the door closure case from the door
closure cover.
6. Remove the Phillips-head screw that attaches
the center hinge cap to the door closure cover.
7. Using a small
fl
at blade screwdriver, pry out the
center hinge cap.
Door Closure
Case
Center Hinge Cap
Note:
There is a closure gasket attached to each
end of the door closure support. Each gasket has
2 pins that pull through 2 holes in each end of the
door closure support.
Closure Gasket
Pins
8. Remove the door closure heater wire harness
from the wire harness cover and the door
closure cover.
Wire Harness Cover
Wire Harness
