Installation Instructions
INSTALLING THE REFRIGERATOR
(cont.)
REMOVE THE FREEZER DOOR
(cont.)
Use the tip of a screwdriver to separate the rail from
the rail cover. Tilt the front end up and lift the entire door.
Set the door front on a nonscratching surface.
Push the rail assemblies back into the cabinet.
CAUTION:
Push both sides of the rail
assemblies back at the same time.
E
F
G
REMOVING THE LEVELING LEGS
(if applicable)
26-cu.-ft. models
Remove the 2 bolts securing the leveling leg bracket to
the front of the refrigerator cabinet. Do this on both
sides.
30
7
8
REMOVING THE LEVELING LEGS
(if applicable) (cont.)
29-cu.-ft. models
Two people are required to complete this procedure.
Gently lean the refrigerator back so the front end is off
of the floor.
Remove the 2 bolts securing the leveling leg bracket to
the underside of the refrigerator cabinet. Do this on both
sides.
8
A
B
REPLACING THE LEVELING LEGS
(if applicable)
26-cu.-ft. models
Replace the 2 bolts to secure the leveling leg bracket to
the front of the refrigerator cabinet. Do this on both
sides.
9
Summary of Contents for PFSS6SKXSS - Profile 25.8 cu. Ft....
Page 44: ...44...
Page 86: ...Notes 86...
