16
49-2000658 Rev. 0
Save time and money! Review the charts on the following pages first and you may not need to call for service.
Troubleshooting tips ...
Before you call for service
Problem
Possible Cause
What To Do
Warming drawer will
not work
A fuse in your home may be blown or the circuit
breaker tripped.
Replace the fuse or reset the circuit breaker.
Warming drawer not plugged in.
Plug in.
Controls improperly set.
See the Using the warming drawer section.
Drawer does not slide
smoothly or drags
Ball bearings out of alignment.
Fully extend the drawer and push it all the way in.
See the Care and cleaning section.
Drawer over-loaded or load unbalanced.
Reduce weight to less than 50 pounds.
Redistribute drawer contents.
Excessive
condensation
Liquid in warming drawer.
Remove liquid.
Uncovered foods.
Cover food with lid or aluminum foil.
Temperature setting too high.
Reduce temperature setting.
Incorrect Moisture Selector setting.
Set the Moisture Selector to the open vent setting
to allow venting.
No heat in the PROOF
setting
Room temperature may prevent the thermostat
from tripping on.
Turn the knob to LOW then back to PROOF.
Food dries out
Moisture escaping.
Cover food with lid or aluminum foil.
TROUBLESHOOTING TIPS
Summary of Contents for PKW7000 Series
Page 17: ...49 2000658 Rev 0 17 Notes ...
Page 37: ...49 2000658 Rév 0 17 Notes ...
