background image

14

About the automatic ice maker. 

A newly installed refrigerator may take 12 to 24 hours to begin making ice.

Automatic Ice maker (on some models)

The ice maker will produce seven cubes per cycle approximately 

100–130 cubes in a 24-hour period, depending on freezer 

compartment temperature, room temperature, number of door 

openings and other use conditions.
If the refrigerator is operated before the water connection is 

made to the ice maker, set the power switch in the OFF position.
When the refrigerator has been connected to the water supply, 

set the power switch to the ON position.
The ice maker will fill with water when it cools to 15°F (–10°C). 

A newly installed refrigerator may take 12 to 24 hours to begin 

making ice cubes.
You may hear a buzzing sound each time the ice maker fills with 

water.
Throw away the first few batches of ice to allow the water line to 

clear.

Be sure nothing interferes with the sweep of the feeler arm.
When the bin fills to the level of the feeler arm, the ice maker will 

stop producing ice. It is normal for several cubes to be joined 

together.
If ice is not used frequently, old ice cubes will become cloudy, 

taste stale and shrink. 
NOTE: In homes with 

lower-than-average water 

pressure, you may hear the 

ice maker cycle multiple 

times when making one 

batch of ice.

For Refrigerator Models with Ice Maker in the Door

Ice Bucket and Dispenser

•  Open the ice box door on inside of the left door.
•  Pull up and out on the ice bucket in the left hand door to 

remove it from  the compartment .

•  To replace the ice bucket, set it on the guide brackets and 

push until the ice bucket seats properly.

•  If bucket cannot be replaced, rotate the ice bucket fork 1/4 

turn clockwise.

•  Ice maker can be turned on and off using this display (see 

About the controls on pages 6 and 7.)

For Refrigerator Models with Ice Maker in the Freezer Compartment

Some models come with an ice maker installed in the 
freezer compartment. For those models that come ice-
maker ready, you can purchase Kit IM-4D. Visit our website 

at GEAppliances.com or call GE Parts and Accessories, 

800.626.2002 (in Canada visit geappliances.ca/en/products/
parts-filters-accessories
 or call 1.800.661.1616). 
There is ice storage in the freezer compartment located on 
the left side of the upper basket. Pull the upper basket for-
ward to remove the ice bucket.

WARNING

    

To minimize the risk of personal injury, avoid contact with the moving parts of the ejector mechanism, or with the 

heating element that releases the cubes. Do not place fingers or hands on the automatic ice making mechanism while 

the refrigerator is plugged in.

Ice bucket fork

Latch

Ice bucket

Ice maker

Feeler Arm

Power 

Switch

Green             

Power Light

Ice bucket

Summary of Contents for Profile 24 CustomStyle













































Reviews: