5
Installation Instructions
The Standard Installation of this Drop-In
Range is to hang by the countertop on the
side metal flanges under glass cooktop.
This Range must not be installed on a
base or sub structure (2
”
x 4
”
support).
If the construction of your cabinet cannot
provide a 1/4
”
flat area at the back of the
countertop opening, consider changing the
countertop to accommodate this dimension.
If the area is not flat, excess tension may
be applied to the glass cooktop, causing
breakage and voiding the warranty.
Center the 30
”
wide opening over the
adjacent cabinets and mark with a
straight edge.
Using a straight edge, mark the back line
at 23-3/16
”
from the front edge of the
counter.
Be careful not to damage the adjacent
cabinets while cutting the countertop.
Remove countertop raised edge, if
incorporated. (See illustration on page 4)
Standard Installation Preparation
B
B1
B2
B3
B4
STANDARD INSTALLATION
Wall
1/4
”
Min.
Flat
23-3/16
”
9/16
”
Min.
Flat
9/16
”
Min.
Flat
29-15/16
”
– 30-1/16
”
Smooth Cut
25
”
Typically
1/4
”
R
Flat
Area
Countertop
Range Support
Braces secured between the
underside of the countertop
and the cabinet if required to
obtain 1-1/4
”
minimum
thickness (two sides)
Summary of Contents for Profile JD968
Page 15: ...15 NOTES...
Page 16: ...16 NOTES 31 10622 1 1 07 JR...
