Burner Heads
(on some models)
Place burner heads over the electrodes
on the cooktop, in the correct locations
according to their size. There is one small, one
medium, one large and one extra large burner
head.
Oval (Center) Burner Head/Cap Assembly
Place the oval (center) head/cap assembly
over the electrode on the cooktop.
Caps
Place the matching size caps onto the burner
bases or heads.
Make sure that the heads and caps are
replaced in the correct locations.
Grates
Place the left, right and center grates on the
cooktop. These grates are position specific.
The undersides of the left and right grates
are marked “LEFT FRONT” and “RIGHT FRONT.”
Place the middle grate with its bowed front
toward the front of the range.
CAUTION:
Do not operate the burner
without all burner parts in place.
Check Ignition of Surface Burners
Operation of all cooktop burners should be checked
after the range and gas supply lines have been
carefully checked for leaks.
Electric Ignition
Select a top burner knob and simultaneously
push in and turn to
LITE
position. You will hear
a
clicking
sound indicating proper operation of
the spark module. Once the air has been purged
from the supply lines, burners should light within
4 seconds. After burner lights, rotate knob out of
the
LITE
position. Try each burner in succession
until all burners have been checked.
50
Installation of the range.
Seal the Openings
Seal any openings in the wall behind the range and
in the floor under the range when hookups are
completed.
Assemble Surface Burners
Operating Instructions
Safety Instructions
Installation
Instructions
Tr
oubleshooting Tips
Consumer S
uppor
t
Medium head
Front of range
Large head
Small head
Extra large
head
Electrode
Slot
Front of range
Oval head and cap
assembly
Medium cap
Front of range
Large cap
Small cap
Extra large
cap
Make sure the slot in
the burner head is
positioned over the
electrode.
Left Front
Right Front
Center
Make sure the slot
in the burner head
is positioned over
the electrode.
Electrode
Slot