– 29 –
Range Components
WARNING:
Sharp edges may be exposed when
servicing. Use caution to avoid injury. Wear Kevlar
gloves or equivalent protection.
Oven Door Removal
Caution:
The door is very heavy. Use the correct
lifting procedure. Do not lift the door by the handle.
To remove the oven door:
Open the door fully.
1.
Insert a
fl
at-blade screwdriver into the cut-out
2.
in each of the hinge door locks. Push the hinge
locks from the locked position down toward the
door frame, to the unlocked position.
Hinge Door Lock
Cut-out
Firmly grasp both sides of the door at the top.
3.
Close door halfway between broil stop and door
4.
closed position (door removal position), then lift
it up and out.
To replace the oven door:
Firmly grasp both sides of the door at the top.
1.
With the door at the same angle as the removal
position, seat the indentation of the hinge arm
into the bottom edge of the hinge slot.
7X]VT0a\
1^cc^\
4SVT
^UB[^c
8]ST]cPcX^]
Fully open the door.
2.
Push the hinge locks up against the front frame
3.
of the oven cavity, to the locked position.
Close the oven door.
4.
Place the door assembly on a protective
5.
surface.
