– 18 –
Door Handle
The door handles allow access into the fresh food
and freezer compartments. They are front
mounted with 1 Torx head screw.
1. With a small flat-blade screwdriver, slide the
handle trim down and pull it out.
2. Remove the lower Torx head screw.
3. Lift the handle in and upward motion until it
disengages the locking tabs. Pull the handle
outward to remove it.
Door Gasket
The door gasket is a molded gasket set into a
channel located in the door liner.
1. Open the door.
2. Grasp the gasket and pull in an outward
motion until the molded gasket separates from
the door liner.
Fresh Food Compartment Quick Access
Door
The fresh food compartment allows access to the
fresh food compartment without opening the fresh
food door.
1. Open the quick access door and remove the
hinge Torx head screws (2), located on each
side of the door.
2. With a small flat-blade screwdriver, remove the
door frame and door frame assembly.
3. Remove the gasket and slide the door out of
the frame.
4. The quick access door also has an interlock
switch located at the top right-hand side of the
interior frame. Remove the Phillips screw and
slide the switch assembly down and out.
5. Disconnect the wires to the switch and remove
it.
Summary of Contents for PSC21MGM
