GE PVWC924, Owner'S Manual And Installation Instructions

3

OPERATING INSTRUCTIONS

•  If the apparatus is equipped with the following controls (Fig.10):

Push-button A = On/off lights switch.

Push-button B = On/off cooker hood switch. The appliance switches on at speed 

level 1, If the cooker hood is on depress the push-button for 2 sec. to switch off the 

cooker hood. If the cooker hood is at speed level 1 it will not be necessary to depress 

the push-button to switch the cooker hood off. Decreases the motor speed.

Display C =

 Indicates the motor speed level selected and activates the timer .

Push-button D = Switches on the cooker hood. Increases the motor speed. Touching 

the key at 3rd speed, the intensive function runs for 10 minutes, then the appliance 

go back to work at the original speed. During this function the display blinks.

Key E = The Timer times the functions on activation for 15 minutes, after which 

they are switched off. The Timer is deactivated by re-pressing Key E

 . When the 

Timer is activated the decimal point must flash on the display. The Timer cannot be 

activated if the intensive speed is functioning .
-  The “

clean air” function is activated by pressing key E for 2 seconds when the 

appliance is switched off. This switches the motor on for 10 minutes every hour at 

the first speed. During functioning a rotary movement of the peripheral segments 

must be visualised on the display . 

When this time has passed the motor switches off and the fixed letter “C” must 

be visualised on the display until the motor re-starts after 50 minutes for another 

10 minutes and so on. Press any key apart from the light keys to return to normal 

functioning. Press key E

 to deactivate the function .

•  Active carbon/grease filter saturation:

-  When display item 

C flashes, at a speed where it alternates with the letter F (e.g. 1 

and 

F

), the 

grease filters must be washed.

-  When display item 

C flashes, at a speed where it alternates with the letter A (e.g. 1 

and 

A

), the 

carbon filters must be replaced.

After the clean filter has been positioned correctly, the electronic memory must 

be reset by pressing button 

A

 for approximately 

5 seconds

, until the indication 

F

or 

A shown on the display C stops flashing.

 MAINTENANCE

•  We recommend that the range hood is switched on before any food is cooked. We 

also recommend that the appliance is left running for 15 minutes after the food is 

cooked, in order to thoroughly eliminate all contaminated air.

The effective performance of the range hood depends on constant maintenance; 

the anti-grease filter and the active carbon filter both require special attention.

•  The anti-grease filter

 is used to trap any grease particles suspended in the 

air, therefore is subject to saturation (the time it takes for the filter to become 

saturated depends on the way in which the appliance is used).

-  To prevent potential fire hazards, the anti-grease filters should be washed a 

minimum of every 2 months (it is possible to use the dishwasher for this task).

-  To remove filters, refer to Fig.7.

Consumer Support

Troubl

eshooting Tips

Operating  Instructions

Safety Instructions

Car

e and Cl

eaning