49-1000514 Rev. 1
13
Installation Instructions
5
LEVEL
Adjustable legs at the front corners of the
beverage center and wine chiller should be set
so the beverage center / wine chiller is firmly
SRVLWLRQHGRQWKHIORRUZLWKD´WLOWWRWKHEDFN
to help the door closure.
To adjust the leveling legs, turn the legs
counterclockwise to raise the beverage center /
wine chiller, clockwise to lower it.
6
SET TEMPERATURE
CONTROLS
• The temperature controls are preset. Refer
to the Temperature Control section for more
information. Allow 24 hours for temperature to
VWDELOL]H
4
SLIDE PRODUCT INTO THE
CUTOUT
• Carefully slide the unit into the opening. Be
careful not to entangle power cord.
0DNHFHUWDLQWKDWWKHGRRUSURWUXGHV´
beyond the surrounding cabinets.
To raise the appliance
INSTALLATION INSTRUCTIONS
3
CONNECT POWER
• Connect power cord plug to a properly grounded
receptacle.
• Make sure power is on by opening the door to
see if interior light turns on.
2
REMOVE RUBBER PAD AND
SHIPPING BRACKET (Cont.)
• Remove 2 screws, shipping bracket, rubber pad
and discard.
• Re-install Toekick with 3 screws.
Rubber Pad
Shipping Bracket
Screws
Shipping
Bracket
Screws
Summary of Contents for PWS06D Series
Page 53: ...49 1000514 Rev 1 17 Notas...
Page 54: ...18 49 1000514 Rev 1 Notas...