31-5000413 Rev. 1 07-19 GEA
Installation Instructions
for your new
RAB24
Standard Steel Wall Sleeve
for 24” Thru-The-Wall Air
Conditioners
Before you begin - Read these instructions completely
and carefully. IMPORTANT – OBSERVE ALL
GOVERNING CODES AND ORDINANCES. Note to
Installer – Be sure to leave these instructions with the
Consumer. Note to Consumer – Keep these instructions
with your Owner’s Manual for future reference.
NOTE: Handle the wall sleeve carefully.
CRITICAL DIMENSIONS
Ceiling
“A”
“B”
“C”
Roomside
Outside wall
“D”
)LQLVKHGÀRRURUWRSRIFDUSHW
NOTE:
Care should be taken in location of electrical
supply entry in relationship to wall sleeve to ensure
access to power once the unit is installed.
Dimensions Recommended Installation Clearance
A
7RSRIZDOOVOHHYHWR¿QLVKHGFHLOLQJ´
min.
B
3URMHFWLRQRIZDOOVOHHYHLQWRURRP´
PLQWR´PD[UHFRPPHQGHG7KLV
DOORZVWKHWULPSLHFHWR¿WSURSHUO\
C
3URMHFWLRQRIZDOOVOHHYHWRRXWVLGH´
min.
D
+HLJKWDERYH¿QLVKHGÀRRURUWRSRI
FDUSHW´PLQ
E
/HIW5LJKWVLGHRIZDOOVOHHYHWRDGMDFHQW
ZDOO´PLQ
INSTALL WALL SLEEVE LEVEL FROM SIDE TO SIDE
AND WITH A SLIGHT TILT FROM FRONT TO REAR
WALL SLEEVE LOCATION
$VDJHQHUDOUXOHWKHDLUFRQGLWLRQHUVKRXOG
be located in an outside wall to ensure proper
distribution of conditioned air. It should be located
in a portion of the wall where there is no electrical
ZLULQJRUSOXPELQJDQGZKHUHWKHUHDUHQR
obstructions immediately inside or outside.
Outside wall
“E”
“E”
Top of case
Top of wall sleeve
