background image

Thermostat Warranty.

For The Period Of: 

GE Will Replace:

One Year 

Full Replacement

 of the thermostat which fails 

From the date of the

 

due to a defect in materials or workmanship.  

original purchase

 

What GE Will Not Cover:

„

  Service trips to your location.

„

  Improper installation. If you have an installation problem, contact your 

installer. You are responsible for providing adequate electrical connections  

to the product. 

„

  Failure of the product resulting from modifications to the product or due to 

unreasonable use, including failure to provide reasonable and necessary 

maintenance.

„

  In commercial locations, labor necessary to move the unit, after it has been 

initially installed, to a location where it is accessible for service by an individual 

technician; or, if the instructions included in this manual have been disregarded.

„

  Replacement of location fuses or the resetting of circuit breakers.

„

  Damage to the product caused by improper power supply voltage, accident, 

fire, floods or acts of God.

„

  Incidental or consequential damage caused by possible defects with this 

thermostat.

Staple your receipt here.  

Proof of the original purchase date is 

needed to validate the warranty.

This warranty is extended to the original purchaser and any succeeding owner for 

products purchased for use within the USA and Canada. In Alaska, the warranty 

excludes the cost of shipping or service calls to your site.
Some states or provinces do not allow the exclusion or limitation of incidental or 

consequential damages. This warranty gives you specific legal rights, and you may also 

have other rights which vary from state to state or province to province. To know what 

your legal rights are, consult your local, state or provincial consumer affairs office or 

your state’s Attorney General.

Warrantor: General Electric Company. Louisville, KY 40225

(;&/86,212),03/,(':$55$17,(6³<RXUVROHDQGH[FOXVLYHUHPHG\LV

product exchange as provided in this Limited Warranty. Any implied warranties, 

including the implied warranties of merchantability or fitness for a particular 

purpose, are limited to one year or the shortest period allowed by law.

16

Summary of Contents for RAK148D2

















Reviews: