31-5000842 Rev. 0
3
PACKAGE CONTENTS/TOOLS REQUIRED:
Package includes:
• Thermostat base
• Thermostat
• Screws
• Wall anchors
Tools needed:
'ULOOZLWKƎELW
• Hammer
• Screwdriver
• Putty
WARNING
ELECTRICAL SHOCK HAZARD — Turn off power by
unplugging the unit or by removing the fuse or switching
the appropriate circuit breaker to the OFF position before
removing the existing thermostat. Failure to do so could
result in risk of electric shock.
INSTALLATION INSTRUCTIONS
TO REMOVE EXISTING THERMOSTAT
1.
Turn off power to heating and cooling system by removing the fuse or
switching off the appropriate circuit breaker.
2.
Remove cover of old thermostat. This should expose the wires.
3.
Remove wires from wire terminals. Note which color wires are attached
to each terminal.
4.
Remove existing thermostat base from wall.
5.
Refer to the following section for instructions on how to install this
thermostat.
Summary of Contents for RAK190V
Page 16: ...16 31 5000842 Rev 0 NOTES...
Page 34: ...16 31 5000842 Rev 0 REMARQUE...
