background image

15

Troubleshooting tips…

www.GEAppliances.com

Save time and money! Review the chart on this page first
and you may not need to call for service.

Problem

Possible Causes

What To Do

No display/faint display

Supply voltage not correct.

Using a voltmeter, check the supply voltage to the 

thermostat. Voltage operating range for the thermostat 

is 18-30 VAC/VDC. If measured voltage is out of this 

range, troubleshoot the supply voltage to the unit.

Thermostat is damaged.

Replace with a new thermostat. Check the supply voltage 

to the unit before connecting second thermostat (see 

above).

Power wiring to unit is incorrect.

Refer to Figures 1 & 2 in the 

Installation Instructions

for 

correct wiring.

Keypad buttons do 

No power to the unit.

Make sure the display is working correctly. If not, 

not work.

follow step one above.

Thermostat is damaged.

Replace with a new thermostat. Check the supply 

voltage to the unit before connecting second 

thermostat (see above).

Thermostat will not

Thermostat setpoint is satisfied.

Raise the temperature setpoint more than 2° above

call for heat.

current temperature.

Unit wiring is incorrect.

Refer to Figures 1 & 2 in the 

Installation Instructions 

for 

correct wiring.

Unit is ‘OFF.’

Make sure the 

FLAME

icon is displayed and blinking. 

If not, push the 

MODE

button until it is displayed.

Thermostat will not

Thermostat setpoint is satisfied.

Lower the temperature setpoint more than 2°

call for cooling.

below current temperature.

Unit wiring is incorrect.

Refer to Figures 1 & 2 in the 

Installation Instructions 

for 

correct wiring.

Unit is ‘OFF.’

Make sure the 

SNOWFLAKE

icon is displayed and 

blinking. If not, push the 

MODE

button until it 

is displayed.

Short cycle delay still active.

Wait 4 minutes. The unit’s short cycle timer is in 

operation.

Fan does not turn on 

Fan failure.

Place a jumper between the R and G terminals.  

with the system.

The fan should come on. If it does, replace the 

thermostat.

Troubleshooting T

ips

Operating Instructions

Safety Instructions

Installation Instructions

Get other manuals https://www.bkmanuals.com

Summary of Contents for RAL163P1





















Reviews: