background image

2

Using your thermostat.

The digital programmable series of thermostats offers an
economical remote control solution for single-stage
heat/cool and multi-stage heat pump applications. System
selections include heat, cool, off or auto mode, as well as
fan on or fan auto selections.

Thermostats are available in the following selections:
RAK163P1 (1 heat/1 cool)
and
RAK147P1 (2 heat/1 cool heat pump)

FEATURE

DESCRIPTION

No batteries required for general 

Saves programmed setpoints in the

operation.

event of a power loss.

24V AC/DC Compatible

Switch selection for either 24 VAC or 
24 VDC operation.

Temperature Safety Circuit

Auto cut-off in heat mode if room 
temperature > 90°F and auto cut-off 
in cool mode if room temperature 
< 60°F.

°F or °C compatible

Switch selection for either Fahrenheit 
or Celsius degrees.

Backlit display

Display is backlit whenever a button 
is pressed.

Programming Modes

5+2- and 7-day programming 
flexibility.

Auto changeover from Heat to Cool

Automatically changes from heating 
to cooling.

Thermostat Overview

Figure 1: RAK163P1 and RAK147P1 Display

LCD SEGMENT

DESCRIPTION

Day indicator 

Indicates the day of week.

AM/PM indicator 

Indicates AM or PM.

Time display

Displays time, program time or set temperature.

Program indicator 

Indicates the operating or editing program 
(Morning, Day, Evening and Night), flashes when 
temporary hold.

Hold indicator

Indicates that the thermostat is in hold mode.

System mode indicator

Shows whether heat, cool, auto or off system is 
selected and operating.

Fan mode indicator

Indicates that the fan is in ON or Auto mode.

Temperature display

Displays room temperature, program  
temperature or span.

Set temp indicator

Indicates that the set temperature is shown.

Celsius mode indicator

Indicates that the temperature displayed is in 
Celsius scale. Default is Fahrenheit.

Set temp indicator

Fan mode
indicator

Celsius mode
indicator

Temperature
display

System mode
indicator

Display Description

General Features

Time display

Program indicator

Hold indicator

AM/PM indicator

Day indicator

Troubleshooting T

ips

Operating Instructions

Safety Instructions

Installation Instructions

Get other manuals https://www.bkmanuals.com

Summary of Contents for RAL163P1





















Reviews: