IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
2
Co
ns
um
er
S
up
po
rt
Tr
ou
bl
es
ho
ot
in
g
Ti
ps
Ca
re
a
nd
C
le
an
in
g
O
pe
ra
tin
g
In
st
ru
ct
io
ns
Sa
fe
ty
In
st
ru
ct
io
ns
Read all safety instructions before using the product. Failure to follow these instructions may result in fire, electric
shock, serious injury or death.
IMPORTANT SAFETY NOTICE
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances
known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of
potential exposure to such substances.
The fiberglass insulation in self-clean ovens gives off a very small amount of carbon monoxide during the cleaning cycle. Exposure
can be minimized by venting with an open window or using a ventilation fan or hood.
To reduce the risk of tipping the range, the range must be secured by a
properly installed anti-tip bracket. See installation instructions shipped
with the bracket for complete details before attempting
to install.
For Freestanding Ranges:
To check if the bracket is installed and engaged properly, remove the
storage drawer or kick panel and look underneath the range
to see that the leveling leg is engaged in the bracket. On models without
a storage drawer or kick panel, carefully tip the range forward. The
bracket should stop the range within 4 inches. If it
does not, the bracket must be reinstalled. If the range is pulled
from the wall for any reason, always repeat this procedure to
verify the range is properly secured by the anti-tip bracket.
Never completely remove the leveling legs or the range will not
be secured to the anti-tip device properly.
For Slide-In Ranges:
To check if the bracket is installed and engaged properly, remove the
storage drawer or kick panel and look underneath the range to see that
the leveling leg is engaged in the bracket.
For Drop-In Ranges:
To check if the bracket is installed and engaged properly, lower
the oven door and gently apply medium force at the handle end until
movement of the range is detected. Continue pressing until the anti-tip
bracket is engaged and movement stops. A small amount of
movement is acceptable at the back of the range top, but it should be
stable and not tip once the anti-tip bracket is engaged. If it does not,
the bracket must be reinstalled.
If you did not receive an anti-tip bracket with your purchase,
call 1.800.626.8774 to receive one at no cost (in Canada, call
1.800.561.3344). For installation instructions of the bracket,
visit GEAppliances.com (in Canada, GEAppliances.ca).
ANTI-TIP DEVICE
WARNING
WARNING
