Technical Manual
GE Reason H49
78
H49/EN M/C22
Configuration
Reason H49 runs internally two configuration files:
•
Running Configuration
: This file is the current configuration of the switch. When
the
Apply
button is pressed at any settings menu, changes made at the
configuration will be saved at this file. If the switch is restarted, this configuration
is discarded and the switch will load, after the reboot, the
Startup Configuration
file;
•
Startup Configuration
: This file represents the configuration that the switch will
run after it is powered up or restarted. If a change in the
Running Configuration
was performed and it is requested to maintain the
Running Configuration
at the
Startup Configuration
, the user must save it using the
Save Running as
Startup
option, in the
Management
page;
Import a New Configuration File
To import a new configuration file to the device, perform the following steps:
•
Click the “
…
” button to navigate to the folder that contains the configuration file
and then, select the relevant .yaml, yml file:
Figure 58: Reason H49 Web User Interface – Select the Configuration File to be imported
•
Click “
Change Running
” to import the file.
Figure 59: Reason H49 Web User Interface – Start the Upgrade Process
At the end of the upgrade process, the new configuration is running on the device.
Only
System
and
Network
parameters are preserved in
Running
and
Startup
configuration.
Summary of Contents for Reason H49
Page 10: ...Technical Manual GE Reason H49 10 H49 EN M C22 1 2 Ordering Options ...
Page 157: ......