GPS Grandmaster Clock
62
RT430-TM-EN-5
4.5
PTP Configuration
The PTP section of the Web Interface, shown in
, allows the user to configure synchronism
parameters using PTP protocol. This setting is possible only for port ethernet 1.
Figure 32: Section to configure PTP parameters
4.5.1
Profile
RT430 has a set of features attributed to the application of PTP protocol, which the IEEE1588 standard
assigns the name of Profile. The unit provides 3 distinct ways to configure its Profile:
Power Profile: profile with all predetermined characteristics, where the user cannot change any
parameters. The characteristics are shown in its respective fields and are non-editable. The Power
Profile configuration is:
o
Domain number 0.
o
UDP network protocol.
o
Two-step operation mode.
o
Mechanism to measure P2P delay.
o
Priority 128 in both Ethernet ports.
o
Operation as master only.
o
Interval between delay, synchronism and announce messages (to calculate BMC) every 1 second.