SECTION 8: Specifications and Safety
2025653-048 Revision B
Responder
™
2000
Page 102
Physical Dimensions
Height: 10.8 inches/27.4 cm
Width: 11.7 inches/29.7 cm
Depth: 7.4 inches/18.8 cm
Weight: Less than 10lbs/4.5kg, excluding battery, paddles, and a full roll of paper.
Environmental Requirements
Operating Conditions
Temperature: 0
°
C to 50
°
C (32
°
F to 122
°
F)
Humidity: 10% to 95% RH, non condensing
Air Pressure altitude: -500 ft (103kPa) to 15000 ft (57kPa)
Storage and Shipping Conditions
Temperature (Responder 2000): -20
°
C to 60
°
C (-4
°
F to 140
°
F)
Temperature (Pads): -12
°
C to 43
°
C (10
°
F to 110
°
F) for 2 years.
NOTE:
Do not exceed 38
°
C (100
°
F) for periods greater than 6 months in duration. Always store the pads in their pouch to
maintain freshness. Do not use if gel has dried out.
Humidity: 10% - 95% RH, non-condensing
Air Pressure altitude: -500 ft (103kPa) to 15000 ft (57kPa)
WARNING:
Electrode performance may be adversely affected by pre-attaching and storing with defibrillator cable or exposure to air
for long periods of time. These electrodes are not recommended for electrosurgery.
CAUTION: Environment of use
Responder 2000 is designed for indoor use. Operator must confirm that the environment of use meets the required
operating environmental specifications before using.
CAUTION: Cold Environments
If the Responder 2000 is stored in an environment with a temperature below the operating temperature, the unit should be
allowed to warm up to the needed operating temperature before using.
