General Dimensions RHM 15
SF0
(serial, sealless construction without dead spaces)
Process Connection
Face to face length (L) Order Code
mm
in
Standard
Flange DIN DN40/PN40
400
15.75
C1
Flange ANSI 1 1/2" 150#
RF/SF
400
15.75
F1
Flange ANSI 1 1/2" 300#
RF/SF
400
15.75
F2
Type single path, welded measuring loops without seals and sanitary connection
Type single path, welded measuring loops without seals and flange connection
A1 = 285 mm (11.22 in)
B1 = 50 mm (1.97 in)
Terminal box (without cable gland) 125 x 80 x 58 mm (4.92 x 3.15 x 2.28 in)
A2 = 300 mm (11.81 in)
B2 = 70 mm (2.76 in)
W = 0 mm for Temperature Range T1 and TA
H1 = 454 mm (17.87 in)
V = 26 mm (1.02 in)
W = 150 mm (5.91 in) for Temperature Range T2, T3 and T4
H2 = 540 mm (21.26 in)
(*) SF0 construction contains brazed joints (brazing material B-Ni82CrSiBFe-970/1000) which are not as corrosion resistant as the piping material 1.4571 (316Ti). Fully
welded joints for corrosive liquids and higher pressure ratings can be provided – please consult your local agent.
Weight in standard manifold construction with female threads: approx. 14 kg (31 lb)
Weight in standard sealless construction and 150# flanges: approx. 16 kg (35 lb)
Shipping on pallet approx. 70 x 40 x 55 cm (27.6 x 15.7 x 21.7 in), gross weight with sealless construction, 150# standard flanges and RHE 08 approx. 27 kg (60 lb)
Finish type of our ANSI flanges corresponds to SF (AARH 125 up to 250 μin, Ra 3.2 up to 6.3 μm)
For customization with regard to face to face length and special fittings, please consult your local agent
Please note that larger diameter process connections are always possible
Process Connection
Face to face length (L) Order Code
mm
in
Standard
Sanitary 1" Triclamp,
DIN 32676
350
13.78
S0
Sanitary NW20, DIN 11851
350
13.78
S2
4
