background image

4

VOLUME UP/DOWN 

Changes the volume 
level of the product, 
normally the TV.

CHANNEL Up/Down

 

Changes the channels.  
The Channel buttons 
also control DVD SKIP 
functions.

MUTE 

Turns off the 

TV sound while the 
picture remains.

RECORD, PLAY, 
STOP, REW, FF, 
PAUSE

 VCR control 

buttons operate your 
VCR even when the 
remote is set to operate 
the TV. Also operates 
DVD Scan -/+. Note 
the VCR buttons also 
control DVD when in 
DVD Mode.

Some buttons on the remote might have functions that 
are referred to by different names on the device you 
are controlling. E.G. 

PREV.CH

 may be called RECALL, 

or 

ENTER 

may be called DISPLAY. These differences 

depend on the brand and model of your product. Also, 
this remote can only operate features that exist on your 
product. E.G., your product must have 

PREV.CH

 ability 

for the 

PREV.CH

 button to operate this feature.

TV, VCR, DVD/AUX, 
CBL/SAT 

Selects product 

to be operated.

  Button Functions

MENU 

Brings up device 

Main Menu. Use Chan 
and Vol buttons as cursor 
buttons and Mute as Okay. 
Press TV to Exit.

TV/VCR

 Operates the 

same as the TV/VCR 
or antenna keys on 
your original remotes.

Summary of Contents for RM24906



















Reviews: