8
Using Your Remote
Code Identification
The Code Identification Feature allows you to identify
the four digit library code stored under your device
button. For example, if you want to find out what
four
digit code is stored under your TV device button,
follow the six steps below:
1. Press and hold the
SETUP
button until
the red indicator stays on. Release the
SETUP
button.
2. Press and release the desired
device button (
TV
,
VCR
, etc.). The red
indicator blinks, then stays lit.
3. Press and release the
SETUP
button. The
red indicator blinks once and remains lit.
4. To find the first digit for the code stored
under the device
button pressed in step
2, press each numeric
button from
0-9
in
turn. The number that
causes the indicator
light to blink is the first
digit in your code.
. To find the second
digit, repeat step 4.
6. Repeat step 4 to find the third and fourth digit.
This time the red indicator turns off and stays off.
