GE RM24918, Instruction Manual

12

Volume/Mute Control and Punch-

Through

This remote lets you select which device Mode 

controls your Volume/Mute buttons. The remote is 

initially set for all device Modes to use their own 

Volume/Mute control if present. If the programmed 

code has no Volume/Mute operation of its own 

then those buttons will punch-through control to 

the 

TV

 Mode device without needing to change to

TV

 Mode. 

Any Mode chosen for Volume/Mute control 

MUST have its own Volume/Mute function or 

the Volume/Mute buttons will do nothing.

Setting ALL Volume/Mute Control to 

any one Mode

This routine can set all Modes to “punch-through” 

to any one chosen Mode for Volume/Mute button 

control without the needing to change to that 

  Using Your Remote, cont.

Mode.

1.  Press and hold the 

CODE SEARCH

button until the red indicator turns on, 

then release the button.

2.  Press and hold the 

MUTE

 button until the 

red indicator blinks off, then release the 

button.

3.  Press and release the desired Mode button 

(

TV

, 

VCR

, etc.) for Volume/Mute control, 

the red indicator blinks then stays on.

4.  Press and release the 

MUTE 

button 

and the red indicator turns off. The 

red indicator will blink rapidly for three 

seconds if the Mode you have selected 

has no Volume/Mute control.  

All other Modes will now punch-through to 

your chosen Mode for Volume/Mute control.