2
ENTER
The ENTER button is used to complete
channel selection for some brands of TV.
It is also used to complete the code entry
process.
VOL & CHAN
The VOL (Volume) and CH (Channel) buttons
increase or decrease channel numbers or
volume.
MUTE
To MUTE the volume on the TV.
PREV CH
PREV CH allows you to go to the previous
channel you selected. Operates the same as
Last Channel, Go Back or Recall button on
your original remote.
0-9
The number buttons operate the same as on
your original remote, and are used for enter-
ing device codes or channel numbers.
MENU
The MENU button calls up the TV and DBS
set up menus.
Battery Installation
Your Universal Remote requires two (2)
new AAA alkaline batteries. To install the
batteries:
1. On the back of the remote, push and
slide the cover off.
2. Match the batteries to the + and
- marks inside the battery case, then
insert the batteries.
3. Press and slide the battery cover back
into place.
Note:
Programmed codes will remain in
memory for a short period of time allow-
ing for battery replacement. If batteries
have been dead for a prolonged period of
time, reprogramming may be required.
