7
The DVD•AUX Button
The DVD•AUX button can be used for a
DVD player. It can also be assigned to any
other type of device (another TV, VCR,
DVD, CD Player, or audio receiver).
1. Manually turn on the
the device you wish
to assign to the
DVD•AUX button
(TV, VCR or Cable
Box or DVD Player).
2. Press and hold the
SETUP button until
the INDICATOR LIGHT
lights, then release
the SETUP button.
3. Press and release the
DVD•AUX button. The
INDICATOR LIGHT
will blink.
4. Find the three digit code
for the device you wish
to program in the code list
Enter the code using the
Number Buttons.
After your code is
entered, the INDICATOR
LIGHT will turn off.
5. Aim the remote at your
device and press the
ON•OFF button. Your
device should turn off.
Note:
If your device
does not respond, try
all the codes for your
brand. If the codes do
not work, or your brand
is not listed, try the
Code Search method
on page 8.
6. With your device on,
press CH+. If the
device responds,
no further program-
ming is required.
7. Enter your code here
for easy reference.
